These systems offer the most advantageous and ideal solution for holding gases containing micron and submicron dust particles, oil vapor, or moisture, when compared to dry type systems. Furthermore, it ensures the separation and retention of other compounds that contain chemical compounds and can be dissolved in water from the air. It is the most efficient wet-type scrubber on the market. It is one of the most cost-effective systems on the market, both in terms of initial investment and ongoing operating costs. In terms of energy consumption, this system offers a significant advantage over dry-type systems. The product is manufactured from materials such as carbon steel, stainless steel, or FRP/PP, depending on the process in question.
The technical characteristics of the scrubber units vary according to the facility and the process they are used. The body and accessories of the filter unit can be designed differently according to the plant requirements and are generally;
HOW IT WORK
Venturi Scrubber units are suitable for separating aerosols and fine dust from gas streams. It is the right choice for particle sizes of approximately 0.7 µm. Dust particles are captured by impinging on the wash droplets in the venturi throat. There is a speed adjustment valve in the venturi throat to allow variable air inlet flows.
The wash medium is delivered by spray nozzles located in the venturi throat. The spray density is such that it covers the entire venturi. The venturi scrubber causes a pressure drop in the gas stream. Typical pressure drop ranges from 5 to 20mbar. These values may vary depending on the overall pressure and particle characteristics.
-
Capacity range from 1,000m3 / h to 500.000m3/h
-
Dust concentrations up to 1-2 microns
-
Temperature range from -10C to + 300C °
-
In dust emissions containing acidic and basic chemical gases
-
Can be used in flammable, explosive, combustible dust concentration.
-
Ability to process high temperature and humid gases
-
Allows the flue gas to cool down.
-
Simultaneous cleaning of gases and dust particles
-
Effective solution against corrosive and corrosive gases
-
Ideal cleaning for micron and submicron powders
-
Low pressure loss and stable efficiency up to 99%
-
Easy of maintenance and repair
-
Welded or bolted construction
-
Carbon steel, stainless steel or plastic housing
-
Automatic or manual dust discharge
-
Special body design
-
ATEX Compliance